background image

ARCLED338PIX

2

WARNING! Before carrying out any operations with the unit, carefully read this instruction 

manual and keep it with cure for future reference. It contains important information about the 

installation, usage and maintenance of the unit.

SAFETY

General instructions

•  The products referred to in this manual conform to the European Community Directives and are therefore marked with  .

•  The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only. Never make 

any modifications on the unit not described in this instruction manual, otherwise you will risk an electric shock.

•  Connection must be made to a power supply system fitted with efficient earthing (Class I appliance according to 

standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units from indirect contact and/

or shorting to earth by using appropriately sized residual current devices.

•  The connection to the main network of electric distribution must be carried out by a qualified electrical installer. Check that 

the main frequency and voltage correspond to those for which the unit is designed as given on the electrical data label. 

•  This unit is not for home use, only professional applications.

•  Never use the fixture under the following conditions:

- in places subject to vibrations or bumps;

- in places with a temperature of over 45°C or less than 2°C.

•  Make certain that no inflammable liquids, water or metal objects enter the fixture.

•  Do not dismantle or modify the fixture.

•  All work must always be carried out by qualified technical personnel. Contact the nearest sales point for an inspection 

or contact the manufacturer directly.

•  If the unit is to be put out of operation definitively, take it to a local recycling 

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

•  Never look directly at the light beam. Please note that fast changes in lighting, e. g. flashing light, may trigger epileptic 

seizures in photosensitive persons or persons with epilepsy. 

•  Before starting any maintenance work or cleaning the projector, cut off power from the main supply. 

•  Make certain that the fixture is off and the temperature of the components cannot cause burns. 

•  Always additionally secure the projector with the safety rope. When carrying out any work, always comply scrupu-

lously with all the regulations (particularly regarding safety) currently in force in the country in which the fixture’s 

being used. 

•  Keep any inflammable material at a safe distance from the fixture.

•  Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent that their ef-

fectiveness is impaired.

•  The lamp (LED) shall be changed if it has become damaged or thermally deformed.

•  Don’t connect the device to a dimmer pack.

GENERAL INFORMATION

Shipments and claims

The goods are sold “ex works” and always travel at the risk and danger of the distributor. Eventual damage will have to be 

claimed to the freight forwarder. Any claim for broken packs will have to be forwarded within 8 days from the reception 

of the goods.

Warranty and returns

The guarantee covers the fixture in compliance with existing regulations. You can find the full version of the “General 

Guarantee Conditions” on our web site www.musiclights.it. Please remember to register the piece of equipment soon 

after you purchase it, logging on www.musiclights.it. The product can be also registered filling in and sending the form 

available on your guarantee certificate. For all purposes, the validity of the guarantee is endorsed solely on presentation 

of the guarantee certificate. Music & Lights will verify the validity of the claim through examination of the defect in rela-

tion to proper use and the actual validity of the guarantee. Music & Lights will eventually provide replacement or repair of 

the products declining, however, any obligation of compensation for direct or indirect damage resulting from faultiness.

The information provided in this manual has been carefully checked.

However Music & Lights S.r.l. is not responsible for any possible inaccuracy.

Summary of Contents for ARCLED338PIX

















































Reviews: