ProLights ARCLED338PIX, User Manual

Page: 40 / 48

ARCLED338PIX
18
3.18 RGB calibration
Enter the CAL2 mode to adjust the RGB parameter to make different whites;
• Press the button MENU so many times until show [ CALIB2 ] and press the button ENTER to confirm.
• Select red, green or blue ( Red - Green -Blue ), through the buttons UP and DOWN. Press the button ENTER
to confirm.
• Set the value ( 000 - 255 ), through the buttons UP and DOWN.
When the new setting is activated, the DMX controller choose RGB=255, 255, 255 the write color will be
made by actual RGB values on the [ CALIB2 ].
3.19 Fan setting
• Enter the [FAN SETTING] to select the fan speed mode (OFF, LOW, NORM, HIGH or AUTO).
When fan setting is on AUTO mode, the fixture will automatic adjust the fan speed and fixture power, ensure
the fixture temperature is not exceed the limit.
When fan setting is on other modes, the fan will run according to the set speed.
3.20 Activate the password
Enter the KEY-LOCK mode to select whether the access password is on or off.
• Press the button MENU so many times until show [ KEYLOCK ] and press the button ENTER to confirm.
• Select [
ON
] or [
OFF
].
Note. The factory access password is UP + DOWN + UP + DOWN. Press ENTER to confirm the access.