17
ARCLED338PIX
3.15 Editing custom programs
To edit the custom programs:
• Press the button MENU so many times until show [
EDIT
] and press the button ENTER to confirm.
• Select the program
CUSTOM01 - CUSTOM10
through the buttons UP and DOWN.
• Each custom program has 30 steps that can be edited.
• Each step allows the creation of a scene using red (
Red
), green (
Green
), blue (
Blue
), strobe (
Strobe
), time
(
Time
) and fade (
Fade
).
• Set the value (000 - 255 ), through the buttons UP and DOWN.
3.16 Special functions
• Press the button menu and select through the directional buttons the [
SETTINGS
] mode; and press the
button ENTER to confirm.
It is possible to view to following functions:
UPLD
• Select [
UPLD
] to upload the custom programs from the current Master unit to the Slave units.
• In order to activate the upload function the password must be entered. Password is the same as the main
access password.
• When uploading the Master and Slave units will display yellow.
• If an error occurs when uploading the Master and/or Slave units will display red.
• On successful uploading of the custom programs the Master and Slave units will display green.
REST
• In order to reset custom modesto default values select [
REST
].
ID ONOFF
• Enter [
ID ONOFF
] in order to allow/disallow ID address function from the DMX controller.
DIMMER
• Enter [
Dim
] to select dimmer mode and dimmer speed. When dimmer is set to [
OFF
], the RGBW and
MASTER DIMMER are linear. The Dim1/2/3/4 are speed modes of the non linear dimmer, [
Dim1
] is the
faster, while [
Dim4
] is the slowest.
Note. The factory default setting is [
Dim4
].
COLOR
• [
COLOR
] is for activate/deactivate the color calibration functions.
- When [
RGBW
] is selected, on RGB =255, 255, 255 the color is displayed as calibrated in CAL2 (RGBW).
- When [
COLOR
] is set [
OFF
], on RGB =255, 255, 255 the RGB values are not adjusted and the output is
most powerful.
- When [
UC
] is selected, the RGB output adjusted to a standard preset universal color which balances
fixtures from different generations.
3.17 White calibration
Enter the
CALIB
mode to select white color of different color temperature;
• Press the button MENU so many times until show [
CALIB1
] and press the button ENTER to confirm.
• There are 11 pre-programmed white colors (
WHITE01 - WHITE11
) can be edited by using red, green and blue
(
Red - Green - Blue
), and
RGB TO WHITE
by using red, green and blue (
Red - Green - Blue
).
• Set the value (
000 - 255
), through the buttons UP and DOWN.
Summary of Contents for ARCLED338PIX
