ProLights ARCLED338PIX, User Manual

Page: 30 / 48

ARCLED338PIX
8
3.4 Operation in automatic mode
If no DMX control signal is present at the DMX INPUT, the unit independently runs through its show pro-
gramme provided that the blackout mode is switched off:
• Press the button MENU so many times until the display shows [ AUTO ], then press the button ENTER.
• Press the button UP and DOWN to switch between the programs (
AUTO 01 - AUTO10
o
CUSTOM01 - CUSTOM10
).
The unit will operate in automatic mode.
IMPORTANT:
Programs AUTO 01 - AUTO10 are fully pre-programmed and will not be altered by changes in
EDIT mode. Programs CUSTOM01 - CUSTOM10 are fully pre-programmed and can be edited in EDIT mode.
Note. In automatic mode the unit will be set as Master.
KEYLOCK
ON
OFF
FANS
OFF
LOW
NORMAL
HIGH
AUTO
(2)
MENU
CUSTOM06
CUSTOM10
..
.
SCENE06
SCENE30
..
.
EDIT
CUSTOM01
CUSTOM02
CUSTOM03
CUSTOM04
CUSTOM05 SCENE01
SCENE02
SCENE03
SCENE04
RED[000-255]
GREN[000-255]
BLUE[000-255]
STRB[000-255]
TIME[000-255]
FADE[000-255]
RED[000-255]
GREN[000-255]
BLUE[000-255]
STRB[000-255]
TIME[000-255]
FADE[000-255]
SCENE05
CALIB1
WHITE01
WHITE02
WHITE03
WHITE04
WHITE05
WHITE06
WHITE07
WHITE08
WHITE09
WHITE10
WHITE11
RED[000-255]
GREN[000-255]
BLUE[000-255]
RED[000-255]
GREN[000-255]
BLUE[000-255]
CALIB2 RGB TO W
RED[000-255]
GREN[000-255]
BLUE[000-255]
RED[000-255]
GREN[000-255]
BLUE[000-255]