Prolight LUMA700, User Manual

Page: 47 / 76

9
LUMA700
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to
reset all motors to their home position. Shortly after that the LUMA700 is ready for operation. To switch
off, disconnect the mains plug from the socket. For a more convenient operation it is recommended to
connect the unit to a socket which can be switched on and off via light switch.
3.2 BASIC
The control panel of LUMA700 has a display and 5 buttons for the complete programming and manage-
ment of the projector menu (fig.4).
Fig.4 - Functions of the buttons and display icons
UP DOWN LEFT RIGHT ENTER BATTERY
Increases the value
displayed or passes
to the previous item
in a menu Decreases the value
displayed or passes
to the next item in
the menu Return to the top
level Commute from
units, tens, hundred
in the menu Confirms the
displayed value,
or activates the
displayed function,
or enters the
successive menu Used to activate the
backup battery. It
allows to switching
display interface
without main power
CONNECT SETUP ADVANCED INFORMATION STAND ALONE
Battery