LUMA700
32
Calibration
Select this function to calibrate and adjust the wheels of the effects in their correct positions:
•
Press the ENTER button to access the main menu.
•
Press the UP/DOWN button keys to scroll the menu, select the
Advanced
icon, then press the ENTER but-
ton to enter the next menu.
•
Press the UP/DOWN button to scroll through the menu, then select
Calibration
and press the ENTER but-
ton to enter the next menu.
•
Press the UP/DOWN button to scroll through the menu, then select
Password
and press ENTER to con-
firm.
•
Use the arrow keys to enter the password 050 and press ENTER to confirm.
•
Once you have entered your password, you can set the values for
Pan, Tilt, Color1, Gobos1, Prism, Focus
. Press
the UP/DOWN button to scroll through the menu, select one of the functions mentioned above and
press ENTER to confirm your choice.
•
Use the arrow buttons to enter the desired value, then press the ENTER button to confirm your choice.
•
Press the LEFT button repeatedly to exit the menu and save changes.
Reload Default
Select this function to reset the unit to factory settings:
•
Press the ENTER button to access the main menu.
•
Press the UP/DOWN button to scroll the menu, select the
Advanced
icon, then press the ENTER button
to enter the next menu.
•
Press the UP/DOWN button to scroll through the menu, select
Reload Default
and press the ENTER button
to enter the next menu.
•
Press the UP/DOWN button to select the favourite recovery mode
Basic Reload/Program Reload/Private
Reload/All Reload
, then press the ENTER button to confirm.
•
Press the UP/DOWN button to select
ON
or
OFF
, then press the ENTER button to confirm.
3.23 FIXTURE INFORMATION
To view all the information on the device, proceed as follows:
•
Press the ENTER button to access the main menu.
•
Press the UP/DOWN button to scroll the menu, select the icon
Information
, then press the ENTER button
to enter the next menu.
•
Press the UP/DOWN button to scroll through the menu, then select one of the following information
and press the ENTER button to display it.
-
Time Information
- Through the
Time Information
function you can display the operating time of the
projector.
-
Temperature
- Through the
Temperature
function can be displayed the temperature inside the fixture,
near the lamp. The temperature can be displayed in degrees Celsius or Fahrenheit.
-
Fans Speed
- Through the
Fans Speed
function you can show on display the fan speed present near the
lamp. Velocity is expressed in RPM (revolutions per minute).
-
Channel Value
- Channel Value function can be used to display the values of the channels by which
the unit will operate when switched on.
-
Error Message
- Through the
Error Message
function can be displayed any errors channels.
-
Fixture Model
- Through the
Fixture Model
function can be displayed the model number and manufac-
turer.
-
Software Version
- Through
Software Version
function you can display the currently installed software
version.
•
Press the LEFT button repeatedly to exit the menu.
Summary of Contents for LUMA700
Page 1: ...MANUALE UTENTE USER MANUAL LUMA700 MOVING HEAD IT EN...
Page 37: ...Note...
Page 75: ......