Proheat M105 G-II PCM, Service Manual

Page: 37 / 90

3-2
PROHEAT M-SERIES G-II PCM SERVICE MANUAL
Minimum Standard Hand Tools
• Digital Multimeter
• Ratchet – 3/8" drive
• Extension, 12" – 3/8" drive
• Socket, 13 mm – 3/8" drive
• Screw Driver, Flat Blade 1/4" blade
• Allen Key, 4 mm – 3/8" drive or extension T-handle
• Allen Key, 5 mm – 3/8" drive or extension T-handle
• Allen Key, 9/64"
• 2x Combination Wrench, 3/4"
• Combination Wrench, 5/8"
• Combination Wrench, 9/16”
• Combination Wrench, 7/16”
• Wire Brush
• Adjustable Wrench
• Vise Grip
• Torque Wrench 25 – 150 in. lbs. [2.8 – 17 Nm]
NOTICE
Additional standard hand tools may
be required. This list is not intended
to be exhaustive.