Filling the salt container
1. Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt container
(only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the
salt container.
Caution!
Water and salt can come out
from the salt container when you fill it.
Risk of corrosion. To prevent it, after
you fill the salt container, start a pro-
gramme.
Filling the rinse aid dispenser
20
30
1
2
3
4
-
+
M A
x
A
B
C
D
1. Turn the cap (
C
) counterclockwise to
open the rinse aid dispenser.
2. Fill the rinse aid dispenser (
A
), no more
than the mark 'max'.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Put the cap in position and turn it
clockwise to close the rinse aid dis-
penser.
Fill the rinse aid dispenser when the
lens (
D
) is clear.
You can turn the selector of the re-
leased quantity (
B
) between position 1
(lowest quantity) and position 4 (high-
est quantity).
DAILY USE
1. Open the water tap.
2. Set the correct programme for the type
of load and the degree of soil. Turn the
programme knob until the symbol of the
programme you want to set is aligned
with the on/off indicator. The on/off indi-
cator comes on. Make sure that the ap-
pliance is in setting mode. Refer
to ’SETTING AND STARTING A PRO-
GRAMME’.
• If the salt indicator is on, fill the salt
container.
3. Make sure that there is rinse aid in the
rinse aid dispenser.
4. Load the baskets.
5. Add the detergent.
6. Press the start button. The programme
starts.
18
progress
