Document Number: MAN0045
Issue: 4.01
Page
4
of
16
CONTROLLERS
TWO DOOR VERSION
The "two door" version simply contains
two access controllers in one enclosure.
Both controllers can be programmed
from the keyboard but first the user
needs to choose which controller to
programme.
To select control panel A (or door 1) press the [#] and [1] key
together. The controller will beep and the ‘Door ‘A’ green
selected’ LED will illuminate.
To select control panel B (or door 2) press the [#] and [2] key
together. The controll
er will beep and the ‘Door ‘B’ green
selected’ LED will illuminate.
ONE DOOR VERSION
The single door version contains only one controller and
therefore, the indicators for Door B are not needed. These
indicators are included in case the unit is ever up-graded to
two doors. Before programming, make sure that the
‘SELECTED’ indicator for Door A is illuminated. If not press
[#] and [1] keys together. The controller will beep and the
‘Door ‘A’ selected’ LED will illuminate.
UNLOCKING THE KEYBOARD
To unlock the keyboard for programming first press * and #.
The keyboard will not accept any input until it is enabled.
PROGRAMMING
Programming is achieved by entering a password at the keyboard followed by a menu selection code. There
are two programming menus, one for the USER and one for the ENGINEER. Each menu has a separate six-
digit password. Depending on the menu option selected, configuration data can then be entered at the
keyboard.
40027
40028
