Document Number: MAN0045
Issue: 4.01
Page
9
of
16
ADDING CARDS by NUMBER
Adding or enabling credentials by entering can be useful when the credentials themselves are not available or
if a large number of credentials need to be
added.
Single card:
Note that some cards have a serial number
printed on them. This should be used with
the cross-reference list, provided with
cards, to determine the actual card
number.
This example will enable a single card
numbered 80230001.
Block of cards
The quickest way to enable a whole group
of cards is to use the block add method
shown in this flow diagram.
This example will enable 50 cards, Site
code 8023 from card 0001 to 0050.
Related User Menus:
02 “Discover Cards”
03
“Forget Cards”
05 “Remove Card”
Related Engineers Menus:
04 “Reader A Technology”
05 “Reader B Technology”
11 “Random Search
20 “Keyboard Mode”
31 to 36
“Feedback Volume
Control”
Status LED will Flash
Enter User Password
* 6 5 4 3 2 1
Select Add Card ID Menu
* 0 4
Enter Card ID
8 0 2 3 0 0 0 1
Status LED will stop Flashing
Complete & Exit Programming Mode
#
Status LED will Flash
Enter User Password
* 6 5 4 3 2 1
Select Add Card ID Menu
* 0 4
Enter Quantity ( 1 to 9999 )
50
Status LED will stop Flashing
Complete & Exit Programming Mode
#
Enter Card ID
8 0 2 3 0 0 0 1
Enter *as a separator
*
