Step P:
Install the Tension Control Knob (37) by inserting the tab into a square hole on
the Hand Pulse Handlebar Support Frame (41) and push down on the knob slightly in
order to align the opening with the bolt hole. Using the screwdriver, tighten the Bolt
(38) until firm. See Figure D.
Step Q:
Attach the Bottle Holder (40) onto the Hand Pulse Handlebar Support Frame
(41) with two Bolts (38). Using the screwdriver, tighten both Bolts (38) until firm.
Step R:
Attach the Hand Pulse Handlebar (33) onto the top end of the Hand Pulse
Handlebar Support Frame (41) with two Carriage Bolts (39), two Cap Nuts (80), and
two Big Curve Washers (81). Using the flat wrench, tighten the cap nuts until firm.
Hardware:
14
ASSEMBLY
(47)
Bolt
4
PCS
(36) Spring Washer 4 PCS
(24)
Washer
4
PCS
(Step L)
(39)
Carriage
Bolt
2
PCS
(80)
Cap
Nut
2
PCS
(81) Big Curve Washer
2 PCS
(Step R)
(38) Bolt
3 PCS
(Step P&Q)
