5
1. If there is a shipping bracket (not shown) on the
rear of the Frame (1), remove the two screws,
the two washers, and the shipping bracket.
Discard the screws, washers, and shipping
bracket.
Identify the Rear Stabilizer (7), which does not
have wheels.
Attach the Rear Stabilizer (7) to the Frame (1)
with two M8 x 90mm Carriage Bolts (34), two M8
Washers (33), and two M8 Acorn Nuts (53).
• To hire an authorized service technician to
assemble this product, call 1-800-445-2480.
• To watch an assembly
video, go to
http://productvideo.co/
assembly/proform or
use your mobile phone
or smartphone to read
the QR code at the right.
• Assembly requires two
persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you
nish all assembly steps.
• Left parts are marked “L” or “Left,” and right parts
are marked “R” or “Right.”
• Some parts may be preassembled. Extra parts
may be included.
• In addition to the included tool(s), assembly
requires the following tool(s):
one adjustable wrench
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
ASSEMBLY
1
7
53
53
33
34
33
1
