Profoon PDX-5200 series, User Manual

Page: 29 / 46

If the display says "NOT SUB" at this point, repeat the registration procedure
again from step 1. If it still doesn't work, consult your dealer for advice.
Once your new handset is registered to your base unit, the display shows its
number, for example: xxxx
* This is the RFPI number, a universal DECT identity number. You won't need it
unless you want to register your handset to a different brand of DECT base unit.
To de-register a handset:
You may need to do this if you have more than one handset registered to your
base unit and you need to replace a faulty handset.
1. Press the
MENU button, the display shows "PHONEBK"
2. Press the xx button TWICE, the display shows "BASE"
3. Press the
OK button, the display shows "VOLUME"
4. Press the xx button SEVEN times, the display shows "DEL HS"
5. Press the
OK button, the display shows "PIN"
6. Key in your PIN (default 0000) and press the OK button
7. Press the xx button repeatedly to go to the number of the handset you want to
de-register
8. Press the OK button, the display shows "CONFIRM"
9. Press the OK button to confirm de-registration
! You cannot de-register the handset you are currently using.
Registering to a different brand of base unit:
Each PDX-5200 series handset can be registered to any GAP-compatible base
unit; or you can register other GAP-compatible handsets to your PDX-5200
series base unit. We do not guarantee that all features or display messages will
be available using other manufacturers' equipment.
1. Follow the instructions in the base unit's User Guide to put the base unit into
registration mode (for example, step 1 on page xx).
2. Follow the instructions in the handset's User Guide to register the handset (for
example, steps 2 to 5 on pages xx to xx).
If you need to enter a PIN code for the base unit, refer to the base unit's User
Guide.
Intercom and transfer:
To make an intercom call:
1. Press the
INTERCOM button, you hear Dial tone.
2. Key in the number of the other handset (1, 2, 3, 4 or 5)
The other handset's number appears on your display. On its display, your
number appears, and the "INT" symbol flashes. When the other handset
user presses the
PHONE button to answer, you will be connected.
For details of how to change the ringing melody for intercom calls, see
'Handset internal ringing melody' on page xx.
29