Profoon PDX-5200 series, User Manual

Page: 19 / 46

can record up to 13 messages; with the maximum length set to 60 seconds, it
can record up to 8 messages.
1. Press the button xx, the display shows "MSG PLAY"
2. Press the xx button FOUR times, the display shows "ICM LENGTH"
3. Press the
OK button, the display shows the current setting (default 40 sec)
4. Press the xx or xx button to select the setting you want
5. Press the
OK button
6. Press the xx button to go back to standby mode
Your remote security code:
This is the three-digit code you'll need to key in if you dial in and check your
messages when you're away from home. The default security code is 000; you
can change it to any three digits you'll easily remember
1. Press the button xx, the display shows "MSG PLAY"
2. Press the xx button, the display shows "SEC CODE"
3. Press the
OK button, the display shows "CODE ?"
4. Key in the current security code and press the OK button
If you key in the correct code (default 000), the display will show
"NEW PIN". If you key in the wrong code, you'll hear a long 'beep' and you'll
need to try again.
5. Key in your new code and press the OK button, the display shows "RETYPE"
6. Key in your new code again and press the OK button, you hear a 'beep' to
confirm.
7. Press the button xx to go back to standby mode
Deleting messages:
To delete a message:
* Press the 4 button while the message is being played back
To delete ALL stored messages
1. Press the xx button, the display shows "MSG PLAY"
2. Press the xx button five times, the display shows "DEL ALL"
3. Press the
OK button, the display shows "CONFIRM"
4. Press the OK button to delete all messages OR press the C button if you don't
want to delete all messages
While the messages are being deleted, the display shows deleting. This can
take up to 45 seconds.
While the messages are being deleted, you cannot program any answering
machine functions and the machine will not automatically answer incoming
calls. You can make and answer calls manually as normal.
5. Press the xx button to go back to standby mode
Remote operation:
To dial home from elsewhere and check your messages:
1. Using a tone dialling phone, dial your home phone number
19