Profoon PDX-5200 series, User Manual

Page: 24 / 46

Auto-answer:
Normally, you need to press the PHONE or SPEAKERPHONE button to answer
an incoming call. But with auto-answer turned on, when your handset is resting
on the base unit or in a charger-pod and it rings for an incoming call, you can
answer by simply lifting the handset. To turn auto-answer on or off:
1. Press the
MENU button, the display shows "PHONEBK"
2. Press the xx button, the display shows "HANDSET"
3. Press the
OK button, the display shows "BEEP"
4. Press the xx button SIX times, the display shows "AUTO ANS"
5. Press the
OK button, the display shows the current setting
6. Press the xx button to switch on or the xx button to switch off
7. Press the
OK button to confirm, then the MENU
button to go back into standby mode
! If you have turned auto-answer on, do not press the PHONE button after you've
answered a call by lifting the handset; if you do, you'll disconnect the call.
Display language:
By default, display messages are shown in English; you can change the langu-
age if you prefer.
1. Press the
MENU button, the display shows "PHONEBK"
2. Press the xx button, the display shows "HANDSET"
3. Press the
OK button, the display shows "BEEP"
4. Press the xx button SEVEN times, the display shows "LANGUAGE"
5. Press the
OK button, the display shows the current language
6. Press the xx button until the language you want is shown on the display
7. Press the
OK button to confirm, then the MENU button to go back into
standby mode
Locking the keypad:
When the keypad is locked, no numbered keys can be pressed so you can't
make calls by mistake.
To lock the keypad:
1. Press the
MENU button, the display shows "PHONEBK"
2. Press the xx button THREE times, the display shows "KEY LOCK"
3. Press the
OK button
4. Press the xx button so the display shows "ON"
5. Press the
OK button to confirm
The display shows the symbol xx when the keypad is locked.
To unlock the keypad:
1. Press the
MENU button, the display shows "KEY LOCK"
2. Press the OK button
3. Press the xx button so the display shows "OFF"
4. Press the
OK button to confirm
24