Profoon PDX-5200 series, User Manual

Page: 16 / 46

To control answering machine functions, you first press the button xx
(also labelled R).
You can then scroll through the menus for the functions you want.
Some of the numbered buttons also give you shortcuts for functions you often
use. Just press the button followed by the numbered button, as shown here.
1 OGM Record the outgoing message (OGM)
2 OGM Play the OGM
3 Record a memo
4 X Delete this message
5 ON Turn the answering machine on
6 OFF Turn the answering machine off
7 Go back to the previous message
8 Play back messages and memos
9 Go forward to the next message
0 Stop message playback
Your outgoing message (OGM):
You need to record an outgoing message (OGM) before the answering machine
will work. Your OGM can be up to 40 seconds long.
To record an OGM:
1. Press the xx button, the display shows "MSG PLAY"
2. Press the
1 button OR press the xx button then the OK button, the display
shows "OGM REC"
3. Wait until you hear a 'beep' (the display also flashes)
4. Record your OGM, speaking clearly into the microphone
5. Press the
0 button to stop recording
6. Press the xx button to go back to standby mode
! You must complete steps 1 to 5 in the correct order.
If you interrupt OGM recording before you've finished, you will lose any OGM
already recorded and your answering machine won't work. Go back and start
again from step 1.
To play back your OGM:
1. Press the xx button, the display shows "MSG PLAY"
2. Press the 2 button OR press the xx button TWICE then press the
OK button
"OGM PLAY" flashes on the display as your OGM is played.
3. Press the xx button to go back into standby mode
Switching the machine on and off:
To switch ON:
1. Press the xx button, the display shows "MSG PLAY"
2. Press the 5 button OR press the xx button three times so the display shows
"TAM ON" then press the OK button
16