www.profitap.com
page 9
3. Additional Module Description
8 Port Connectivity Module:
Version : Copper In-Line, Part No. :
XXS-4CIL
Use: Up to four (4) true In-Line TAPs for 10/100/1GbE UTP
The Copper In-Line Module comes equipped with eight RJ45 Connectors. Once connected
links are failsafe and attached segments will never be
interrupted, even if the XX-32G is not powered due any reason.
The configuration (speed, full or half duplex) on each connected Network Link is initialized by
the data flow passing the connected link automatically.
In addition, LED-based signalling displays in real time the speed of each port, its activity and
indicates any failure during link detection.
Version : Copper SPAN Module, Part No. : XXS-8CSP
Use: Up to 8x SPAN 10/100/1GbE Input Ports or up to 8x 10/100/1GbE
Output Ports. XX-Manager (see Software manual)
allows configuration of each Port Usage for
In- or Output in any combination.
The Copper SPAN Module is equipped with 8x RJ45 Connectors.
All Ports allow a data flow analysis from Switch Mirror Port, SPAN Port or any other Source
line, all filtering and extraction can be set by XX-Manager (see Software Manual for how to
configure).
All Ports could be used for attaching Monitoring Devices, fully configurable by XX-Manager as
well.
Each port is tri-speed (10/100/1GbE) and will automatically detected and configured while
connected to a switch or monitoring output line.
In addition, LED-based signals display in real time the speed of each port, its activity and
inform of any failure during link detection.
