www.profitap.com
page 22
7. Basic Network Configuration
Getting started
(cont’)
As main part of XX-32G the XX-Manager - a GUI-driven Configuration- is controlling the SetUp
for Aggregation, Filtering & Routing and gives control over 1GbE & 10GbE Network Traffic for
Monitoring.
Multiple Filter rules per Port in any combination for various Routing and Filtering, Duplication
or Replication and more options can be configured for adaption to all kind of analysis.
An integrated archive gives quick access to establish filters scenarios on the fly or allow
storage of previously used filtersets to meet new or standard requirements.
To connect with the Management locate the Management Ports on
the backside of XX-32G - there are 2 connections available:
RS422
Management
RJ45 Management Port
Two 2 ways to access:
1.
Ethernet (up to 1Gbps)
http, https, SSH
Default Network setup :
IP 192.168.0.2 / 255.0.0.0
Security : https (256bit) : SSL 1024bit certificate is pre-installed
2.
Serial RS232
console
This is the fall-back mode in case any restore of factory defaults is required.
(see chapter 8. Retrieving Factory Defaults)
Connection setup : 115200 baud, 8bit, No parity, 1 bit stop
