www.profitap.com
page 18
10x 1GbE SPAN
Monitor Device A
Monitor Device B
Monitor Device C
Monitor Device D
7x 1GbE SPANbE
Note
: The passive In-Line Fiber TAP Monitor A/B outputs are connected further to 2x 1GbE
SPAN Ports of XX-32G. All SPAN Intakes can be Copper or Fiber SFP‘s in any mix.
The shown Quad Fiber TAP allow 4 passive Fiber In-Line Tappings
connected further to any defined SPAN Input Port at XX-32G.
Monitor A B
Network A
Network B
5. Connecting to Network and Appliances
(Samples)
(cont’)
XX-32G and SPAN Connectivity Module (Copper or SFP):
Set for aggregating 10x 1GbE SPAN Input ( 7x by Connectivity Module plus additional 3x 1GbE
SPAN by fixed Ports for Output set to both 10GbE SFP+ and 2x 1GbE Ports at Connectivity Mo-
dule and fixed Ports:
XX-32G and FiberTAP via SPAN Connectivity Module (SFP):
Set for aggregating 9x 1GbE SPAN Input ( 7x by Connectivity Module plus additional 2x 1GbE
SPAN by fixed Ports for Output set to first 10GbE SFP+ and 3x 1GbE Ports at Connectivity Mo-
dule and fixed Ports:
Monitor Device A
Monitor Device B
Monitor Device C
Monitor Device D
