www.profitap.com
page 20
LED # 2, 3 + 4 off to orange
LED PWR 1 on : connected to mains and active
LED PWR 2 on : connected to mains and active
6. Powering on XX-32G
Assuming all necessary precautions while physical connections have been proceeded the unit
can be powered on now :
The System does not provide a main power switch,
XX-32G powers up if one of redundant
powersupplies is being connected to mains power.
The use of both powersupplies is recommended to achieve a maximum failsafe operation at
any time.
Please remember the connectivity module are swappable - you may exchange or add a
module at any time under power, but be aware of data loss during the exchange.
There are 2 vertical groups
of LEDs:
4x Systemstatus
2x Power
Power
Systemstatus
If power is connected refer to the System Status and Power indicators
during the
initialization process
:
The XX-32G initialisation takes appr. 40 seconds. If ready, the
display will change to indicate the
normal Operation Mode
:
LED # 2, 3 + 4 green
LED PWR 1 on: active
LED PWR 2 on: active
LED #2 off/turns constant orange: Device starting in progress
LED #1 constant green: All components active
LED #1 flashing green: normal Operation
