www.profitap.com
page 21
6. Powering on XX-32G
(cont’)
The presence of redundant power is displayed by 2 separated Power Indicators (LEDs). If
constant on, the Powersupply is active. If one LED is off, this could either indicate only a single
Powersupply is in use or the second
powersupply is not in function.
Verify proper operation of both Powersupplies by connecting the second unit to mains to see
LED is reporting the functional status for Redundancy at normal Operation in case it is
required.
Indications during
Update Process
being performed:
LED #1, 2, 3 + 4 steady orange for ~20s after reboot
LED PWR 1 on: active
LED PWR 2 on: active
For all events and indications always check at the Mamagement Application Status page for
further information (
see Software Manual for how to use)
(There is no order for using powersupplies No. 1 or 2 at single
mains operation - any for a primary use is valid)
