67
PC-FT3094 IM new
20.04.21
Battery Installation Direction
Operation Instructions
Temperature Mode Settings
• With the device switched on, press the “
Memory / Mode
” button for three seconds
until to “F - 1” is shown to enter the long term calibration drift correction mode. On
entering the mode, the previous temperature correction factor will appear on the
GLVSOD\7RPDNHDFRUUHFWLRQPHDVXUHDNQRZQ¿[HGWHPSHUDWXUHVRXUFH(QWHU
the correction mode and press the or button to change the correction value
and minimize the difference in readings. Repeat and adjust the correction value
as needed until the measurement on the device matches the known temperature.
The mode is applied to Body Temp.
• Press the “
Memory / Mode
” button a second time “F - 2” shown to set the alarm
temperature limit. Press the or button to change the value.
The mode is
applied to Body Temp.
• Press the “
Memory / Mode
´EXWWRQDWKLUGWLPH³)´VKRZQWRVHWWKH&)
WHPSHUDWXUHXQLWV7KHWHPSHUDWXUHXQLWV&RU)ZLOOEHVKRZQ3UHVVWKH
or
button to change the unit.
• Press the “
Memory / Mode
” button a forth time “F - 4” shown to set the backlit
status. Press the or button to switch from ON to OFF.
Mode
Function
“ ”
“
”
Default
Remark
F - 1
Setting devia-
tion value
Increase
&
Decrease
&
&
Body mode available
(IIHFWLYH5DQJH&
F - 2
Setting alarm
value
Increase
&
Decrease
&
&
Body mode available
Effective Range:
a&
Summary of Contents for PC-FT 3094
Page 126: ...PC FT3094 IM new 20 04 21 ...
Page 127: ...PC FT3094 IM new 20 04 21 ...