7.8 Sound message settings
7.8.1
Ring tone settings
KDC1905 system enables to select one of 7 default ringtones. In parameter 300, enter the ringtone number, where 6
correspond to the classic ringtone known from CD1803 system.
The current ringtone can be modified using the parameters in Table 28. Parameter 301 changes the tim e of a
single ringtone sequence. The next parameter, with the number 302, modifies the interval between ringtone
sequences.
Parameter 322 modifies the ringtone volume in the cassette loudspeaker .
Note!
If PC512 is connected, lowering the ringtone volume in the cassette will block the ringtone volume
control in the hearing instrument. In order to allow residents to change the ringtone volume with PC512, the control
panel should ring at the maximum volume.
7.8.2
Audio signal settings
With parameter 296 it is possible to set the beeper volume in the cassette speaker. The volume of all sound messages
in the cassette loudspeaker is changed, except for the ringtone, the volume of which is set by parameter 322 .
In addition, the KDC1905 system enables to change the lengt h of acoustic signal generated each time the
keyboard key is selected. Changes are carried out by editing parameter 411 .
In parameter 412 it is possible to select one of three types of lock opening confirmations (up to version 7r57) .
In the software from version 7r57 onwards, additional door opening confirmation signals have been introduced.
Parameters are shown in Table 29. Thanks to the entered division it is possible to generate a different confirmation
for different types of lock code and RFID (see chapter 8.1).
Summary of Contents for KDC1905
Page 2: ......
