4016Series Operation Manual 61
5. Please press Device Setting, the following screen will appear.
6. Please enter the relevant settings :
i.
IP Address :
ii.
Subnet Mask :
iii.
Gateway Address :
iv.
Network link speed : (AUTO)
v.
DHCP client : Dynamic IP setting, the default value is Disable, unless the DHCP Server
can change the setting to Enable
vi.
Socket port of HTTP setup : The default is 80, no need to set
vii.
Socket port of serial I/O : Please set to 4001
viii.
Socket port of digital I/O : Please set to 5001
ix.
Destination IP address / socket port (TCP client and UDP) Connection : no need to set
x.
Serial I/O settings (baud rate, parity, data, bits, stop bits) :
Please set to 115200, N, 8, 1
xi.
Interface of serial I/O : Please set to RS-232
xii.
Packet mode of serial input : The default value is Disable, no need to set
xiii.
Device ID : Default value 5, no need to set
xiv.
Setup password :
xv.
Access password :
Summary of Contents for 4016 Series
Page 1: ...4016 Series Operation manual S N 900401602 REV E...
Page 9: ......
