Prodeco Technologies G Plus Mariner 7, User Manual, Page: 16 / 42

16
o. Safe riding in various conditions
Riders may find themselves riding in a condition they did not plan on encountering. It is important your new G Plus
Mariner 7 is maintained properly for optimum performance. Please read Chapter 7 on the details required to keep
your electric bicycle at its best. An unexpected rain storm, snow flurry or night ride could arise during a day’s trip
and you should always be prepared. Please read Chapter 4 on Safety, so upon encountering an unexpected ride
condition, you will be confident and ready.
p. Charging your battery
The G Plus Mariner 7’s battery system is the safest and latest technology in Lithium Ion battery cells and was
designed to be easily charged. Chapter 8 offers a detailed explanation on battery management but the following
information is a basic guide in charging your battery. The battery is a removable device and can be charged on or
off the bicycle. If removing the battery to charge it, please follow these instructions.

Locate the key ignition on the battery base and turn the key in a counter clockwise rotation to the
“UNLOCK” position. You must push the key in to turn from the “OFF” position to the “UNLOCK”
position.

Grab the handle at the back of battery and pull towards the back of the bicycle to slide off.

The battery is now transportable and can be charged away from the bicycle.
For charging, please review the following instructions.

Remove the rubber cover off the battery’s RCA charging input.

Insert the charging plug from the charger into the battery’s RCA charging input.

Insert the charger’s power cord into a wall outlet.

The charger’s LED light will light RED while the charger is charging the battery.

The charger’s LED light will light GREEN upon the battery being fully charged.

The top of the battery includes a battery indicator to also check for a full charge. Press the indicator
button to display the battery’s energy storage.

Once the battery is charged, you should discontinue charging and remove the charger.

Unplug the charger’s power cord from the wall and remove the charging plug from the battery.

You can now cover the RCA charging input with the attached rubber cover and you are ready to install
the battery pack back onto your bicycle.

To install the battery, first align the bottom of the battery with the battery base rails.

Once aligned, slide the battery completely into the battery base and until the battery base terminals
insert into the battery’s positive and negative outlet.

Once the battery is properly slid into place, you can then turn the key to the “ON” position.

The LEDs on the throttle in the “ON” position will display a fully charged battery if all 3 green LED lights
are on.
Chapter 4: Safety
The manual has detailed safety riding methods. In this chapter we will further discuss additional safety guidelines.
a. The basics
Below is a basic guideline according to the CPSC (US Consumer Product Safety Commission) in regards to riding
a bike safely.

Always wear a helmet to help prevent head injuries.

Observe all traffic laws and signals, just as automobiles must do.

Don’t ride double or attempt stunts.