» INSTALLATION INSTRUCTIONS
/ OCTO / OCTO + / HEXA
34
proswell.fr
ARTICLE
Subject and scope of the
guarantee
Term of the guarantee as of
the date of purchase
Conditions governing acceptance of a claim
CONNEC-
TIONS
Leaktightness of the filter
tank.
Leaktightness of the connec-
tion elements.
5 years on the filter tank
The hydraulic installation and notably the
pump, should generate an operating pressure
less than 1.2 bar.
Regular back washes to clean the filter to avoid
clumping of the filter medium.
>>
GUARANTEE (contd)
CAUTION! The following problems, associated with inappropriate use of the filtration components, are not covered
under the terms of this guarantee:
- Leaks caused by running the filter at an operating pressure greater than 1.2 bar (use of a pump that is too powerful,
clogged filter medium, etc.), or installing the filter above the water level without a vent and check valve. (see the installation
instructions)
- “stress-cracking “ of ABS parts (valve, nuts) caused by surface reactants found in some types of grease: grease should not
be used on these types of components.
- The continuous expulsion of sand if sand with a grain size of less than 0.6 mm is used. (the sand supplied has the correct
grain size).
ARTICLE
Subject and scope of the
guarantee
Term of the guarantee as of
the date of purchase
Conditions governing acceptance of a claim
PUMP
Motor operation
Operation and leaktightness
of the hydraulic components.
2 years
See below and regular cleaning
CAUTION!
The following problems, associated with inappropriate use of the pump, are not covered under the terms of
this guarantee:
- Running the pump ‘Dry’ (absence of water, clogging of the pre-filter)
- Running the pump without the pre-filter
ARTICLE
Subject and scope of the
guarantee
Term of the guarantee as of
the date of purchase
Conditions governing acceptance of a claim
POOL
FITTINGS
Leaktightness and durability
of the pool fittings
10 years