Procom DVS-21, User Manual

Page: 8 / 131

User Guide
DVS-21
02/2018
• V.1.0 • L. Wolle
8/131
© 2017 ProCom
®
Professional Communication & Service GmbH • Technical changes reserved.
Menu Online
see Online functions
Monitor Recording message traffic.
Data transfer Transfer and activate the configuration files.
DVS Update Update the CPU-Firmware.
Time Transfer local PC time to the CPU.
Simulation
By simulating, messages can be sent to modules, telegrams from modules can be
emulated, and flags can be switched.
Menu Edit see System Configuration
System data
General data and preferences of the system.
Call stations Manages the call stations of the system.
Module rack Manages the hardware equipment of the system.
Programs Manages the programming of the system.
Menu Tools see Tools
Database editor Direct access to the datasets (special skills required)
Offline monitor external program for evaluation of recordings of telegrams.
Compare files Byte by byte comparison of two program files
WAV Player Playback of a WAV File from the /wav/ directory
Tone generator external program for the generation of test tones.
Speech storage Configuration dialog for testing and recording the DSS1 ( Speech storage )module.
Documentation
Creates an overview of the entire programming of a system. Print out of a labeling sheet
at plug-in carrier width.
Plausibility
Inspection of the configuration for logical correctness. Inspection takes place only in the
case of classic intercom connections and AllCall (group) calls within a local system!
Dependencies Dependencies and version numbers of programs.
Menu Settings see
Settings
Preferences Change the language and preferences of the program.
RS232 Settings Settings of the serial interface.
Menu Help
Help This document...
Wiring Pin assignment of the modules. (Displayed with the default image viewer)
Examples
Programming examples for typical use.
Info Version and release information of the program.