Procentec Atlas 101-800110, User Manual, Page: 8 / 58

© PROCENTEC
8/58
2. Quick Start
This checklist lists all the steps to a quick usage of Atlas.
Step: Instructions: See paragraph:
STEP 1 Install the device on a DIN rail.
(3.1 and 3.2)
STEP 2 Connect the Office port to your laptop and the Factory port to the factory
(3.4)
network. The factory side should NOT be connected to a mirror port of a
switch.
STEP 3 Connect the Atlas to a power supply. Wait until the green RDY LED is on.
(3.3)
STEP 4 Set your laptops IP address to 192.168.1.1 and the netmask to
(3.5)
255.255.255.0.
STEP 5 Open a web browser and go to https://192.168.1.10/ . You will receive a (5.2)
warning about the certificate:
•
Chrome users should click ‘ADVANCED followed by ‘Proceed ..’
•
Internet Explorer/Edge users should click ‘ Continue to this website .. ’
STEP 6 Use user ‘admin’ and password ‘admin’ for the first login. (7)
STEP 7 Now complete the Setup Wizard but don´t change the settings of Office port (8)
yet.
STEP 8 Now setup the Office port in the Settings, unplug your laptop and connect
the Office port to the office network.
The Atlas is now operational. From here you can change settings, layout and behavior of the Atlas. If
connected to a factory network, it will start scanning and gathering information.