Procentec Atlas 101-800110, User Manual, Page: 40 / 58

© PROCENTEC
40/58
17.3 Date & time
The Time zone selection field allows the user to
select the time zone of the physical location of the
Atlas.
When choosing automatic time, the Atlas will try to
connect to one of the given NTP servers (see the
image) which require internet connectivity. In case
you have a local NTP server(s) then you can remove
and replace these defaults servers.
In case you do not want to use automatic time, you
can turn it off and manually set the time.
17.4 Ethernet (office) & Ethernet (factory)
Both the Factory and Office interface can be
configured manually or automatically using DHCP.
In case you configure the interface manually and you
would like to make use of automatic time (via the
internet) you should enter the Gateway and DNS
servers.
More information can be found in the chapter 3.4
Ethernet connections.