Procentec Atlas 101-800110, User Manual, Page: 38 / 58

© PROCENTEC
38/58
15. OPC UA
OPC UA has been selected as the foundation of Industry 4.0 and it
allows for integration with SCADA systems.
The OPC UA server functionality is switched off by default.
On the OPC UA page you will see the address you can use to connect from a client to Atlas and the ability to
start the server. Once the OPC UA server is started the button will change into ‘Stop server’. This means the
OPC UA server is active.
When a connection has been established, the following information can be discovered:
• Device information
•
Traffic Light – entire network
•
Q-Factor – entire network
•
Measurement Status
16. E-mail Notifications
The E-mail Notifications tile is a shortcut to the Email settings.
See chapter 17.6 for more information.