Operation
52400045 / 52400049
23 / 29
GB
19.
Move the handgrip downwards (
), to
achieve the desired working height.
20.
To lock the handgrip, pull out both spring
bolts a little (
right and left of the device
)
then turn and release them again until they
engage.
21.
Switch on the vacuum generation at the
pressure switch (at the blower unit) (
).
22.
The suction of the load (stone slab) as well
as the release is done via the cable plug
(with integrated ON/OFF switch) on the
handle. (
).
23.
Place the suction plate
always
completely on the
load (stone slab). Position the suction plate
always centrally on the load (stone slab) for a
uniform load balancing.
When the suction plate is positioned off center,
there is a risk (when lifting and lowering), that
the load suddenly may fall down. Caused by
uneven load balancing.
Watch the pressure gauge. Once a under
pressure of - 0.22 bar is reached, the load can be
lifted.
Never lift the load before lifting - the load would
fall down.