Part Name & Functions
Introduction -
1
Dome Cover
- Protects the camera module from outside environment.
- Do not detach protection film from the dome cover
before finishing all installation processes to protect
dome cover from scratches or dust.
Lockup Screw
Fixes main body to the surface mount bracket.
Fan
Fan for temperature control.
HD-SDI Cable
Main video output cable.
9P Terminal Block Slot
Power, keyboard controller, Alarm input and relay out
cables are connected to this terminal block.
LED & Reset Button
LED for active(yellow light), power(red light) status
and Reset button for reset camera.
ID Setup Switch
Specify the camera ID.
Mounting Hole
This is used to attach the surface mount bracket to the
ceiling.
¾” Pipe Mounting Hole
- This is used to pass the cables to the cameras.
- When water protection is needed, connect the ¾” pipe
through this hole, then pass the cables through the
pipe.
2
1
5
3
4
6
7
8
9
Main Body
1
2
Bottom of Main Body
3
4
5
7
8
9
6