Probasics WC4L1616DE, Manual

Page: 3 / 34

3
Congratulations on purchasing a quality ProBasics
®
K4 Lite
Strength Lightweight Wheelchair. Our wheelchairs combine
style and durability at an affordable price. Please be sure to
read these instructions and warnings thoroughly and follow
the instructions of your healthcare provider to maximize the
wheelchair’s benefits and your safety.
DO NOT ATTEMPT TO ADJUST OR OPERATE
THIS WHEELCHAIR WITHOUT READING ALL
INSTRUCTIONS CAREFULLY.
Remove the wheelchair from all packaging including tape,
cardboard and plastic. Check all parts of the wheelchair for
damage before use. If any parts are missing or damaged, DO
NOT attempt to use the wheelchair. If you do not understand
the manual, contact your dealer for a complete explanation
of the instructions, cautions and warnings. Otherwise injury
may result.
NOTE: DO NOT use excessive force when installing any parts.
TO OPEN/UNFOLD WHEELCHAIR
Open wheelchair by tilting to one side toward
you and pushing down on seat rail until fully
opened. Ensure seat rails are fully cradled in
seat rail guides (Fig. A).
TO CLOSE/FOLD WHEELCHAIR
First, fold foot plates to vertical position. With both hands,
grasp the middle of the seat upholstery at the front and back
edge and lift up. Or, tilt chair to one side toward you and lift up
on seat rail.
NOTE: Keep hands and fingers clear of moving parts to
avoid injury.
INSTALLING/REMOVING THE FRONT RIGGINGS
1. Turn the front rigging to the side (open
footplate is perpendicular to wheelchair).
2. Install the front rigging hinge plates onto
the hinge pins on the wheelchair frame
(Fig. B).
3. Push the front rigging towards the inside
of the wheelchair until it locks into place.
An audible click will be heard.
NOTE: The footplate will be on the inside of the wheelchair
when locked in place.
ASSEMBLY INSTRUCTIONS
A
B
WARNING