ProAppliances PRO-TP Installation & Operation Instructions Download

Page: 21 / 24

INSTALLATION AND OPERATING INSTRUCTIONS

Error
code

Description

Possible reasons

Solution

Motor electric current too high.

Overloading or big pieces of food
blocked by the stirring shaft.

Decrease the loading, or Pause and use spatula to
remove the blockage and restart.

Speed transfer failure.

Speed changing between low level
(1-5) and high level (6-10) blocked.

Remove the bowl, turn the lower clutch manually
and fi x the bowl and restart.

Motor NTC missing.

Motor temperature sensor
connection loose or damaged.

Stop using and contact customer service.

Fan doesn't work.

The fan is damaged or connection
loose.

Stop using and contact customer service.

E10

Electric current for Fan is not
strong enough.

The fan is damaged or connection
loose.

Stop using and contact customer service.

E11

Pulse function does not work
when pressed

Pulse function blocked when
temperature in jar is above 60°C to
protect against danger of scalding
by splashing hot food.

Allow ingredients in jar to cool before trying again.

Summary of Contents for PRO-TP

























Search results

Summary of Contents for PRO-TP

Reviews:

Related manuals for PRO-TP

Brands by name

Popular brands

ProAppliances PRO-TP, Installation & Operation Instructions

Search results

Summary of Contents for PRO-TP

Reviews:

Related manuals for PRO-TP

Brands by name

Popular brands