PROALL G Series, Operator'S Manual

Page: 16 / 59

MX05001
2-6
Rev.
1
3 March 2022
Wear appropriate hearing
protection when operating
for long periods.
Know where overhead
electrical lines are located
and stay away from them. Electrocution can
occur without direct contact.
Review safety-related items annually with all
personnel who will be operating or
maintaining the equipment.
Operating Safety
Read and understand the Operator's Manual
and all safety signs before using.
Place all controls in neutral, stop the engine,
turn the master power switch off and wait
for all moving parts to stop before servicing,
adjusting, repairing, or unplugging.
Do not operate when any guards are
damaged or removed. Install and secure
guards before starting.
Keep hands, feet, clothing, and hair away
from all moving and/or rotating parts.
Do not allow riders on the equipment during
operation or when transporting.
Clear the area of all bystanders, especially
small children, before opening or folding
equipment.
Clean reflectors, signs, and lights before
transporting.
Before applying pressure to the hydraulic
system, make sure all components are tight
and that steel lines, hoses, and couplings are
in good condition.
Review safety instructions with all personnel
annually.
Maintenance Safety
Follow ALL the operating, maintenance, and
safety information in the manual.
Support the machine with blocks or safety
stands when changing tires or working
beneath.
Follow good shop
practices.
Keep service area
clean and dry.
Be sure electrical
outlets and tools are
properly grounded.
Use adequate light for the job at hand.
Use only tools, jacks, and hoists of sufficient
capacity for the job.
Place all controls in neutral, stop the engine,
turn the master power switch off and wait
for all moving parts to stop before servicing,
adjusting, repairing, or unplugging.
Make sure all guards are in place and
properly secured when maintenance work is
completed.
Before applying pressure to a hydraulic
system, make sure all lines, fittings, and
couplers are tight and in good condition.
Relieve pressure from the hydraulic circuit
before servicing or disconnecting from a
tractor.
Keep hands, feet, hair, and clothing away
from all moving and/or rotating parts.
Place hydraulic controls in neutral and stop
engine before working on equipment.
Clear the area of bystanders, especially small
children,
when carrying out any
maintenance and repairs or making any
adjustments.
Hydraulic Safety
Make sure that all components in the
hydraulic system are kept in good condition
and are clean.
Replace any worn, cut, abraded, flattened,
or crimped hoses or metal lines immediately.