PROALL G Series, Operator'S Manual

Page: 17 / 59

MX05001
2-7
Rev.
1
3 March 2022
Relieve pressure before working on the
hydraulic system.
Do not attempt any makeshift repairs to the
hydraulic fittings or hoses by using tape,
clamps, or cement. The hydraulic system
operates under extremely high-pressure.
Such repairs will fail suddenly and create a
hazardous and unsafe condition.
Wear proper hand and
eye protection when
searching for a high-
pressure hydraulic leak.
Use a piece of wood or
cardboard as a backstop
instead of hands to
isolate and identify a leak.
If injured by a concentrated high-pressure
stream of hydraulic fluid, seek medical
attention immediately. Serious infection or
toxic reaction can develop from hydraulic
fluid piercing the skin surface.
Before applying pressure to the system,
make sure all components are tight and that
lines, hoses and couplings are not damaged.
Storage Safety
Store unit in an area away from human
activity.
Do not permit children to play on or around
the stored machine.
Store the unit in a dry, level area. Support
the base with planks if required.
Transport Safety
Make sure you comply with all local
regulations
regarding transporting
equipment on public roads and highways.
Make sure all the lights and reflectors that
are required by local highway and transport
authorities are in place, are clean, and can be
seen clearly by all overtaking and oncoming
traffic.
Make sure all transport safety locks are in
place before transporting.
Do not allow anyone to ride on the
equipment during transport.
Add extra lights or use pilot vehicles when
transporting during times of limited visibility.
Tire Safety
Failure to follow proper procedures when
mounting a tire on a wheel or rim can
produce an explosion which may result in
serious injury or death.
Do not attempt to mount a tire unless you
have the proper equipment and experience
to do the job.
Have a qualified tire dealer or repair service
perform the required tire maintenance.