9
Attach the provided bolt, shaft collars,
washers and nut. Tighten all the Allen bolts
and nuts to secure properly as shown in the
image.
Connect the one end of Head Platform
Levelling cable with the head platform by
hooking the turnbuckle ends.
To mount Rear section of jib, insert the bolt
with washers through one end of the section
to other. Slide the bolt through and secure
by tightening with hand.
Rear Frame
Setup
Attach other end with the hub assembly.
Pan Tilt Head
Setup
Attach the PROAIM SENIOR PAN TILT HEAD
base platform to the Tripod or jib arm using
the four ¼”screws. Tighten to secure.
