8
Insert rear tube section (section 1) into the
hub assembly, slide section 2 into section 1
and align holes of the Section 1 and section 2
with the central hole of hub assembly.
Already attached 1st and 2nd jib sections,
insert it into the hub then insert the long bolt
and nut to Secure the sections properly.
Jib Sections
Setup
2
1
Repeat this process for rest of the sections.
Attach them towards the other Section 6 with
5 , 5 with 4, 4 with 3, 3 with 2 & 2 with 1.
3
2
1
After alignment of holes (Jib arms) insert
shank lock pin & tighten it from another side
with shank threaded cap. For double security
insert the locking pin from the top of jib arm.
NOTE:
We have provided double locking precautions on Jib, Knob is first and primary, pin is secondary
locking, so first lock the knob to avoid slipping of sections.
Remove the bolt from head section then
attach with the jib.
Head Section
Setup
