Proaim Drive One Wireless Follow focus (FF-WRLS-DR-ONE)
5
Receiver Connection
15mm Rid clamp
Clamp Knob
This is a guide to get you started with the Proaim Drive one follow focus as quickly as possible. We
recommend that you read through the rest of this guide for more detailed instructions on operating the
Drive One Wireless Follow focus.
- Power the transmitter with one 9v battery.
- Power the receiver with 3 pin XLR input or Sony NP mount camcorder battery.
- To set frequency, press and hold FREQ button until the light starts to cycle through colours. Stop or
preferred colour. Repeat for each unit, matching the colours. Verify DATA light is solid green.
- Set up the system off the camera to verify operation
- Install the correct gear to the motor and slide motor onto the camera rod.
- Position the motor (but do not engage gear teeth yet)
- Route cable to the receiver, and plug in, aligning the red dots. The angled end is for the receiver.
INTERCHANGEABLE LENS GEARS
