Proaim Drive One Wireless Follow focus (FF-WRLS-DR-ONE) 2
INTRODUCTION
PROAIM presents its new Drive One wireless remote follows focus system. It assists the camera operators in
adjusting the focus or focal distance (zoom) of the camera shooting remotely. The Wireless Follow Focus can
be used along with matching camera control gear like DSLR rigs, sliders, Steadycam kits, cranes/ jibs / dolly,
Easy Rigs etc. It allows the user to precisely operate the focus ring on a 35mm lens from up to 200 metres
away. The system provides a choice of 7 bands on which to transmit the encoded data stream, and two user
definable limits to calibrate motor movement or serve as focus stops. The transmitter requires only a single
9V battery and the receiver utilises a standard 4-pin XLR for 12v power input, allowing the user to connect a
standard V-lock power, or use the provided AA battery pack.
IN THE BOX
Please inspect the contents of your shipped package
to ensure you have received all that is pictured and
listed below.
Proaim Transmitter
Unit
Proaim Receiver Unit
Proaim Motor Unit
Proaim Marking
Rings (1 Included)
2x Antena
Interchangeable Gear(s)
Lemo Cable (60cm)
