background image

Proaim Drive One Wireless Follow focus (FF-WRLS-DR-ONE) 

 3 

WARNING 

- Do not over tighten any rod clamps or tighten with no rod inserted. 

- Do not press on the membrane panel lights (frequency and limit). 

- Do not operate in wet environments. 

- When not in use for long periods of time, remove batteries. 

- For best performance, do not use rechargeable batteries. 

- Do not attempt to use with high gain antennas. 

- Do not attempt to open any of the units unless instructed to do so by focus Products, doing so could 

void your warranty. 

- To clean the units, wipe with a damp cloth. 

- Always transport in a rigid bodied case. 

- Do not pierce or dispose of batteries in fire. 

- Do not dispose of units in household waste. 

      Cinema Lenses 

Please note that the Proaim is intended for SLR and broadcast lenses only. The motor does not have the 
power or the rotation necessary to control heavy and stiff cinema lenses. 

Using the Proaim motor with cinema lenses could cause noisy operation, and could damage the gearing 
inside the motor. 

This product conforms with Restriction of Hazardous Substances Directive  
This product meets U consumer safety, health and environmental requirements. 

Summary of Contents for FF-WRLS-DR-ONE












Reviews: