Usage instructions SPEEDY 4all & 4you & 4teen
53
the M6 fixing screw (AF 4 mm) to which the
tension spring is secured at the bottom. When
loosening the M6 fixing screw, the footstep pin
must be held using pliers (the footstep pin
must be protected from scratching while being
held with pliers). After removing the M6 fixing
screw, the tension spring can be removed.
Figure 148: M6 fixing screw and tension
spring removed from anti-tipping bar
Figure 149: M6 fixing screw with radius discs and
footstep pin
There is an inlet within the anti-tipping bar that
must be adjusted to the new height position.
The inlet should be positioned as low as possi-
ble in the anti-tipping bar. A screwdriver could
be used for the positioning of the inlets, for
example.
Figure 150: Inlet of the anti-tipping bar and the
screwdriver
Now the tension spring is positioned in the inlet
so that the end eyelet of the tension spring is
positioned precisely over the borehole in which
the M6 fixing screw shall then be screwed in
to. Once the inlet and the tension spring have
been positioned correctly, the M6 fixing screw
(with both radius discs and the footstep pin)
(AF 4 mm) is crewed into the new height posi-
tion through the inlet and the end eyelet of the
tension spring.
Finally, reattach the anti-tipping support to the
product as described in Chapter 24.2.
24.4 Safety instructions
The anti-tipping support is designed ex-
clusively to minimise the risk of tipping over
backwards. It is not suitable for reducing the
risk of tipping forwards or to the side. There is
no safety equipment on offer for minimizing
these risks. For this reason, handling these
risks need to be learnt in cooperation with your
therapists and doctors.
Before using the product, each time after
loading the anti-tipping supports and after eve-
ry adjustment to the product, make sure that
the anti-tipping supports are fully functional. In
this case, it must not be possible to swivel the
anti-tipping supports to the side when in oper-
ating position without having to unlock them
first.
Tension
spring with
cord
M6 fixing screw with
footstep pin
Radius discs
M6 fixing screw
Footstep pins
Inlet
