Usage instructions SPEEDY 4all & 4you & 4teen
52
pin and on the other side, in the recess of the
anti-tipping support adapter.
Figure 144: Anti-tipping bar inserted into the anti-
tipping support adapter
Now the anti-tipping supports are held at the
bottom on the anti-tipping bar in this position
and the spring retention cap is put onto the
anti-tipping support adapter (loosen the M5
fixing screw on the spring retention cap first in
case this have been screwed in not to loose it)
so that the cord protrudes from the top.
Figure 145: Spring retention cap placed on the anti-
tipping support adapter, cord pulled through up-
wards and M5 fixing screw inserted
Finally, the cord is strongly pulled upwards
until the tension spring becomes visible at the
top of the spring retention cap (this must be
held tight in the process). At the same time, the
M5 fixing screw (AF 3 mm) is screwed back
into the spring retention cap and through the
end eyelet of the tension spring. The M5 fixing
screw (AF 3 mm) must be secured using screw
locking fluid.
Figure 146: Tension springs with end eyelets
Figure 147: The M5 fixing screw screwed through
the end eyelets of the tension spring
24.3 Height adjustment of the anti-
tipping support
The following instructions are intended
for and may only be carried out by a rehabilita-
tion specialist dealer or PRO ACTIV
This must be removed first for the height ad-
justment of the anti-tipping support (see Chap-
ter 24.2). The footstep pin is then removed via
Cord pulled
through upwards
M6 fixing screw
engaged in the
recess of the anti-
tipping support
adapter
M5 fixing screw
Cord pulled
through upwards
End eyelets
