Usage instructions SPEEDY 4all & 4you & 4teen
43
Figure 113: M6 fixing screw with washer and slot in
footrest support tube for adjusting the lower leg
length
Once the position has been set, fix the footrest
support tubes by tightening the M6 fixing
screws (AF 4 mm) with washers to 11 Nm on
both sides.
Note:
With a V-shaped product frame or with a larger
lower leg width at the top than the bottom, it is
necessary to relieve the footrest support tube
tension in the footrest support plate resulting
from longitudinal adjustment. In this case, the
M6 fastening clamp screws (AF 5 mm) on the
footrest support plate therefore have to be
opened before starting to adjust the lower leg
length. View the procedure in Chapter 23.1.
23.3 Footrest folding up to one side
Figure 114: Footrest folding up to one side, stand-
ard position
For
footrest folding up to one side
, lift the
footplate up in the direction of travel on the left
side.
Figure 115: For folding up to one side, lift the foot-
rest up in the direction of travel on the left side
(product view from the front)
Figure 116: Footplate raised from the bracket (prod-
uct view from the front)
Figure 117: Footrest folded up on one side (product
view from the front)
M6 fixing screw
with washer
Slots in the
support tube
Fold-up on
one side
Footplate support
Bracket with cylinder pin
