Usage instructions SPEEDY 4all & 4you & 4teen
28
20.2.2 Removal and attachment of the
clothing guard on the SPEEDY 4all
Ergo and SPEEDY 4you Ergo mod-
els
To
remove the clothing guard
, it is first pulled
from the "side section mount, bolted" at the
front and then from the back joint shaft at the
rear.
Figure 60: Clothing guard pulled from the "side
section mount, bolted" at the front (view without
drive wheel)
To
attach the clothing guard
, this is first
mounted on the back joint shaft with the rear
side section mount and then the front side
section mount is inserted in the "side section
mount, bolted".
Figure 61: Rear side section mount mounted on
back joint shaft (view without drive wheel)
20.3 Adjusting the clothing guard posi-
tion
The following instructions are intended
for and may only be carried out by a rehabilita-
tion specialist dealer or PRO ACTIV
After adjusting the drive wheel position or in-
stalling different tyres on the drive wheels, it
may be necessary to adjust the position of the
clothing guard on the wheel arch. The distance
between the tyres and the clothing guard
should be between 5 and 8 mm to avoid pinch-
ing your fingers, scraping the tyres on the
clothing guard, and obstruction when grasping
the handrim.
To adjust the clothing guard position, loosen
the two or four M5 fixing screws (AF 3 mm)
from the clothing guard mounts on each of the
clothing guards.
Figure 62: Clothing guard mount
Figure 63: M5 fixing screws and elongated holes of
the mounting bar (SPEEDY 4all, -4you and -4teen)
M5 fixing screws
Clothing guard
mount
Slots of the
mounting bar
