Operating instructions LITTY 4you
5
8 Technical
specifications
8.1 Product
weight
The total weight depends on the dimensions
and accessories and starts from 6.7 kg.
8.2 Load
weight
Maximum load weight:
Up to 50kg payload
8.3
Obstacle height and turning circle
Maximum drive-over / negotiable obstacle
height:
10cm
Turning circle:
approx. 1m
8.4 Service
life
The service life of the product is 6 years in
accordance with the medical products law.
9 Commissioning
The product is handed over to you ready to
use by a PRO ACTIV dealer.
You will be fully instructed in the use of the
product based on the operating instructions
included in delivery. If you wish (recommended
by PRO ACTIV), you will be presented with a
record of training and a hand-over certificate
as written evidence and in addition the operat-
ing instructions and any other accessories for
your own use. The form for the record of train-
ing and the hand-over certificate can be found
in chapters 32 and 33.
It is recommended that you take along an as-
sistant to the training so that, if required, they
can assist you later when handling the product.
During the initial commissioning of the product,
drive at minimum speed and become accus-
tomed to the driving characteristics of the
product. Always adapt the speed and driving
manoeuvres to match your own abilities and
external circumstances. You will get a feel for
how to use the product safely after a short
time.
10 Hand-over
The hand-over must be done by your dealer or
a field representative from PRO ACTIV. During
the hand-over, the record of training (chapter
32) and the hand-over certificate including the
associated check list (chapter 33) must be
filled in. The dealer should send a copy of the
completed documents to PRO ACTIV for filing
either as a scanned file via e-mail, by fax or in
the post. These documents are available as
pdf files which can be completed in the
download area at
www.proactiv-gmbh.com
.
11 Safety instructions - prior to
driving / use
When getting into the wheelchair, do not
tread on the footrests as this may tip the chair
over.
Before every trip, check the condition of
the wheels (e.g. visual inspection of the spokes
and rims, check the tyres for damage, foreign
bodies and crack formation). If you have any
doubts about the serviceability of the product,
stop using it.
Before starting out, check that the prod-
uct's brake works. If all existing brakes are not
fully functional, no trips may be taken.
Always ensure that your feet cannot slip
off the foot plate when using the product, if
necessary by using a special securing device.
Check tyre pressures at regular intervals.
Ensure that you comply with the manufac-
turer's specifications which can be found on
the tyres. Tyre pressure which is too low af-
fects on the driving behaviour of the product
and has a negative effect on the braking effi-
ciency.
