Operating instructions LITTY 4you
16
Figure 24: Loosening the protective cap on the
caster wheel bearing block with a wrench
Figure 25: Protective cap of the caster wheel bear-
ing block completely removed
When
attaching the caster wheel fork with a
bolt-on axle
, insert the caster wheel fork ro-
tary axle back into the caster wheel bearing
block and tighten the protective cap of the
caster wheel bearing block again using the
wrench and secure it with thread lock fluid.
18.3.2
Caster wheel fork with quick-release
axle
The
caster wheel fork with a quick release
axle is removed
by pressing the locking knob
between the caster wheel and the inside of the
caster wheel fork. Reach into the caster wheel
fork and press the locking knob. The caster
wheel fork can now be pulled out.
Figure 26: Caster wheel fork with quick release axle
and locking knob
When
attaching the caster wheel fork with
the quick release axle
, press the locking knob
again and insert the caster wheel fork rotary
axle back into the caster wheel bearing block.
When doing this, special attention should be
paid to ensure that the locking knob springs
out again after attaching the wheel as other-
wise the wheels are not secure.
19 Anti-tippers
To reduce the risk of tipping backwards unin-
tentionally to a minimum, anti-tippers are avail-
able as accessories. The anti-tippers are in-
serted into anti-tipper sleeves in the bottom
frame tubes which secures them against twist-
ing.
Figure 27: Illustration of terms
Quick Pins
Anti-tipping wheels
Anti-tippers
Locking knob in
inside of fork
Wrench
Caster wheel
bearing block
Protective cap
