NJ1 el. & FREAK el. compact bike usage instructions
43
36 Appendix: Inspection lists
Initial inspection:
After 200
km or 5 months
Serial number:
___________________
Kilometre reading: _______________________
OK/
carried out
not OK
resolved
Check that all screws/fastening elements are firmly seated
Functional and safety check of all lights (if fitted), steering and adapta-
tion of the drive unit to the chassis
Functional and safety check of the brakes and, where necessary,
replacement of the brake fluid, brake pads, brake cables and tyres on
the product.
Check the electrical connections
Check, adjust / set, clean and oil the gear components
Check the wheel track of the running wheels and that the drive wheel
bearings are firmly seated (tightening torque 70 Nm)
Check the spoke tension of the drive wheel and, if required, correct
the tension/re-centring and inspect the axle nuts of the drive wheel for
firm seating (tightening torque for neodrives: 30 Nm)
OK / carried out = OK | not OK = not OK | resolved = the fault was corrected
Comments:
Rehabilitation specialist dealer:
_____________________________________
First name and last name of contact:
_____________________________________
Stamp:
_________________________________________
Date/signature
To maintain the warranty rights, the completed inspection list must be sent by e-mail or post to PRO ACTIV within four weeks of
the inspection.