![background image](http://html1.mh-extra.com/html/pro-point/procut45/procut45_user-manual_1607434016.webp)
8611303
PROCUT45 PLASMA CUTTER
V1.1
16
For technical questions call 1-800-665-8685
4.2 Keep the air hose behind the tool and out of the tool's
work path.
4.3 Keep the air hose away from heat, oil, sharp edges or
moving parts.
4.4 Do not wrap the air hose around the tool as sharp
edges may pierce or crack the air hose. Coil the air
hose when storing.
5. A damaged or disconnected air hose under pressure may
whip around and inflict personal injury or damage the work
area. Secure the compressor's air hose to a fixed or
permanent structure with clamps or cable ties.
6. Install an in-line shutoff valve or regulator to allow
immediate control over the air supply in an emergency,
even if a hose is ruptured
7. Check the manufacturer’s maximum pressure rating for air
tools and accessories. Compressor outlet pressure must be
regulated so as to never exceed the maximum pressure rating
of the tool.
ELECTRICAL SAFETY
WARNING! To reduce risk of electric shock, be certain that the
plug is connected to a properly grounded receptacle.
1. Do not come into physical contact with the welding current
circuit. The welding current circuit includes:
1.1 The workpiece or any conductive material in contact with it.
1.2 The ground clamp.
1.3 The electrode.
1.4 Any metal parts on the plasma torch.
1.5 The output terminals.
2. Insulate yourself from the electrical current and ground
using electrical insulating mats or covers big enough to
prevent physical contact with the workpiece or ground.