8611303
PROCUT45 PLASMA CUTTER
V1.1
14
For technical questions call 1-800-665-8685
contents. Do not connect a regulator to a cylinder that
contains a gas that the regulator was not designed to handle.
3. Do not expose a cylinder to excessive heat, sparks, slag,
flame or any other heat source.
3.1 A cylinder exposed to temperatures above 130 °F will
require water spray cooling. This method may not be
compatible with the plasma cutting machine due to the
hazard of electrocution.
4. Do not expose a cylinder to electricity of any kind.
5. Do not attempt to lubricate a regulator. Always change a
cylinder carefully to prevent leaks and damage to the
cylinder’s walls, valve or safety devices.
6. Gases in the cylinder are under pressure. Protect the
cylinder from bumps, falls, falling objects and harsh
weather. A punctured cylinder under pressure can become
a lethal projectile. If a cylinder is punctured, do not
approach until all pressure is released.
6.1 Protect the valve and regulator. Damage to either can
result in regulator’s explosive ejection from the cylinder.
7. Always secure a gas cylinder in a vertical position to a
welding cart or other fixed support with a steel chain, so it
cannot be knocked over.
7.1 Away from areas where they may be struck or
subjected to physical damage.
7.2 A safe distance from the cutting operations and any
other source of heat, sparks or flame.
7.3 Do not use as an improvised support or roller.
8. Always place the cylinder cap securely on the cylinder
unless it is in use or being serviced.
9. Do not use a wrench or hammer to open a cylinder valve that
cannot be opened by hand. Notify your supplier for instructions.
